Standar hljóðnema

Nýtt

K-M Smartphone holder festing f/ síma

With this universal holder, your smartphone is always within reach. The holder is suitable for all flat devices with a width of 45 to 90 mm. The operation is quick and easy. Insert smartphone - press clamping jaws together - done. The device is released again at the touch of a button. The clamping jaws with integrated rubber pads guarantee a secure hold. The movable supports can also be folded away completely if necessary. Thanks to the ball joint, the holder can be tilted up and down and rotated through 360°. The flexible support arm provides additional individual positioning. A sturdy clamping element with user-friendly wing nut enables quick installation on any tube with a diameter of 10 to 30 mm.

Samtals m/vsk

2.990 kr.

Á lager

Nýtt

K-M Tablet PC holder

Universal tablet holder with a convenient clamping mechanism for tablets ranging in size from approx. 10" to 16" in horizontal - and approx. 7" to 13" in vertical position. The clamping range of the tablet PC holder is between 155 and 307 mm The tablet holder is made of bio-based plastic. These plastics contain a proportion of over 50% up to 100% of renewable vegetable raw materials. The use of renewable raw materials helps to conserve limited petroleum resources and reduce harmful CO2 emissions. More information on bio-based plastics at: bioplastic.k-m.de. The holder is also particularly suitable for tablets with a protective cover or case up to 18 mm thick. The overlapping clamping jaws with integrated rubber pad guarantee a secure hold and eliminate unwanted vibration noise. The function of the operating elements on the device an the tablet pencil (portrait format only) are not impaired. The holder can be tilted, allowing each user to position it individually. Whether on stage, in the rehearsal room or at home - thanks to the 3/8" or 5/8" internal thread, the holder can be quickly and easily screwed onto any microphone stand.

Samtals m/vsk

5.690 kr.

Á lager

Nýtt

K-M Mic Stand 3ja liða m/bómu

Three-piece telescoping shaft. Metal, non-marring height-adjustment mechanisms, complete with boom arm. 

Samtals m/vsk

16.108 kr.

Á lager

K-M Spjaldtölvu fest. með statífi

The combination of the stand and the Universal Tablet Holder supports you on stage, at home or in the studio. The individually adjustable support arms can accommodate the use of tablets ranging in height from 222 to 334 mm and width from 128 to 232 mm (for example iPad, iPad Air, iPad Pro, Amazon Fire HDX 8.9, Samsung Galaxy Tab from 9.7, Google Nexus 9, Asus Transformer or Microsoft Surface as well as Surface Pro). The depth of the tablets can vary between 6 and 11 mm. For the first use of the tablet holder the support arms settings are made by adjusting the clamp screws to the size and depth of the tablet. For other uses the tablet can be attached and detached quickly and simply through a snap lock. A handy wing nut allows one to adjust the angle, so that each user will easily be able to find their ideal individual position. The tablet can switch between portrait and landscape positions. The tablet is kept in place, there is no danger of the tablet switching position by itself. The light and expandable stand can be adjusted to any height between 70 and 155 cm. A small and compact footprint makes this stand easy to transport. 

Samtals m/vsk

15.990 kr.

Á lager

K-M Mic Stand 3ja liða

Extremely compact microphone stand. Three-piece shaft, non-marring height-adjustment system, lightweight plastic base with folding legs.

Samtals m/vsk

9.590 kr.

Á lager

K-M Gæsaháls 30cm XLR svartur

3 pole plug NC3MX XLR terminating in a 3 pole bushing with NC3FX XLR spring bushing.

Samtals m/vsk

8.990 kr.

Á lager

K-M Hljodnema Fótur á borð XLR m/rofa

Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, crackle-free switching, with phantom powering-pilot light, with pushbutton "push-to-talk" (black). Two diodes indicate the operating state (voltage / microphone ON/OFF). 

Samtals m/vsk

28.990 kr.

Á lager

K-M Hljodnema Fótur á borð XLR

Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, without pushbutton or switch.  

Samtals m/vsk

19.990 kr.

Á lager

K-M Desktop Camera Stand

Useful desktop camera stand for mounting compact cameras, action cameras, web cams, mini-projectors and mobile recorders with a 1/4" connection thread. The ball joint allows the mounted equipment to be rotated 360° and fixed in any position. The height can be freely adjusted from 280 mm to 488 mm via two clamping levers. The tilt-angle is infinitely adjustable up to 90° and the load capacity is designed for equipment up to 1 kg. For transport, the tripod folds compactly to save space.

Samtals m/vsk

8.990 kr.

Á lager

K-M Míkrafón stand one hand

The new star in your show! The avant-garde, one-hand microphone stand is setting new standards in design and function. The elegant combination of triangular-shaped sections and the new design of the slender one-hand adjustment mechanism go harmoniously with standard microphone clips and microphones. The integrated knurled screw is impossible to lose and makes tightening and positioning the microphone clip easy. The stand’s simple elegance loses nothing by the addition of König & Meyer’s classic swivel arm. The height of the stand can be adjusted soundlessly, simply and easily using the unique one-hand clutch. The stand is significantly lightweight, but nonetheless stable due to the ingenious round base with an integrated steel plate with an attractive plastic cover. The base’s circumferential rubber profile reduces undesirable vibration and footfall noise even when the stand is tilted far over to the side. Damage to flooring (e.g. parquet) is also prevented.

Samtals m/vsk

24.990 kr.

Á lager

K-M Quick release f/ mic stand

The extremely practical Quick-Release adapter facilitates the quick and easy change of microphones or other accessories on stage or in the studio. Simple handling: by pressing the grey button, the threaded bolt is unlocked and can already be removed. Thanks to the anti-twist hexagonal connection, the adapter is also ideally suited for use on microphone fishing poles. Included in the delivery are two threaded bolts. The body of the adapter is made of high-quality aluminum, which makes it very lightweight yet robust. The support for the threaded bolt is made of impact-resistant and low noise plastic.

Samtals m/vsk

3.190 kr.

Á lager

K&M DJ Desk - Borð 117x60cm

Large folding event table for the professional DJ and many other uses. The 1,170 long and 600 mm wide tabletop offers plenty of space for all kinds of equipment and accessories. With a thickness of 25 mm, the MDF top can bear a load of up to 30 kg. The perfect working height is adjusted in 15 mm steps between 625 and 1,045 mm. For transport or space-saving storage, the two feet are folded in without further ado. The sturdy tubular steel construction and the large round levelling end caps give the practical table a very high level of stability and a secure stand.  

Samtals m/vsk

65.990 kr.

Á lager

K-M Mic klemma á stand 3/8"

The robust clamping element with the ergonomic clamping screw provides for a quick and easy mount to tubes with a diameter of up to 30 mm. Thanks to the 3/8" screw all K&M iPad holders or Tablet PC holders can be mounted easily. Alternatively, an additional microphone or other accessories (with 3/8" threaded connector) can also be mounted.

Samtals m/vsk

4.890 kr.

Á lager

K-M Mini boom arm

The short moveable microphone boom arm is suitable for many applications. It is particularly appropriate for overhead uses. There are 3/8“ and 5/8“ threaded connectors to take the microphone holder. Thanks to the flexible clamping, the boom arm can be positioned in length and angle with one simple movement.

Samtals m/vsk

3.990 kr.

Á lager

K-M Boom arm single

Short one-piece boom arm with 3/8" thread. Locking washer and plastic grip. Smooth adjustment. Easy to tighten with wing nut.

Samtals m/vsk

3.290 kr.

Á lager

Presonus Shockmount f/PX1/M7

Shock mount for the PreSonus PX-1 and M7 microphones. Experienced recordists know that mechanical handling noise and environmental vibrations are very easily picked up by sensitive microphones—and the low bumps and rumbles they create can ruin otherwise perfect recordings! Keep physical vibrations out of your microphone and ensure the best-possible recording quality with the SHK-1 shock mount. The SHK-1 isolates your microphone from the mechanical vibrations of the physical world—meaning when you record, you only have your voice or instrument to worry about.

Samtals m/vsk

4.990 kr.

Á lager

K-M Thread adapt. 5/8-3/8 Zink

5/8" 27 gauge female thread, 3/8" male thread.

Samtals m/vsk

750 kr.

Á lager

K-M Mic festing m/ gripkló

This exclusive microphone arm with a 3/8" or 5/8" thread connector in a modern design with a new innovative table clamp for quick and easy positioning of a microphone in the studio or at a multimedia work station. The 6 m long internally guided microphone cable has a 3 pin XLR plug connector. Microphones to max. 1.5 kg are easily held in any position. The clamping width of 10 to 51 mm / ø 15 to ø 51 mm allows the clamp to be attached to a wide variety of surfaces. The stable metal construction with high quality plastic inserts guarantees secure and strong hold. The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and round-shaped tubes. The microphone arm can also be fixed with the table flange 23855 available as an optional extra.

Samtals m/vsk

6.990 kr.

Á lager